GROUNDING INDEX

In the area of surge protection whether from lightning or transient voltage, the most important thing is that the building and/or item to be protected is grounded. Without a ground, there is nowhere for the energy to go and the results of near and direct lightning strikes or utility surges are devastating.

Proper surge protection grounding practices can be found below in the Technical Information section. Further technical questions can be addressed to our engineering staff.

• FB and BF ADAPTERS Flange to Bulkheaad & Bulkhead to Flange Adapters
• Polyphaser Entrance Panel (PEP)
• PolyPhaser Earthed Entrance Panels (PEEP)
• PB Series Bulkhead Entrance Panels
• GSIE Series Grounding System Internal to External Kit
• UNI-KIT 2 Series Cable Grounding Kit
• CU-SPGP Single Point Ground Panel and Weather Proofing Kit
• CCK Copper Cleaning Kit
• RACK ISO KITS Rack Isolation Kit
• Copper Strap
• Copper Strap Bonding Clamps
• TK Series Corrosion free ground clamps
• WK-1 and J Series Wire/Copper Rod Transition Clamps and Weather Proofing Kit

• Technical Bulletin 1090 The Ground Window Concept
• APPENDIX A Part 1Grounding Overview
• APPENDIX A PART 2 Lightning Protection Information
• APPENDIX B Technical Formulas
• APPENDIX D PART 1 UNI-KIT Installation
• APPENDIX D PART 2 pH Soil Test Kit Instructions
• AC Retrofit - How to make a single point ground when the ac power breaker panel is mounted away from the coax cable
• Backfill Grounding
• Cathodic Lightning Protection System
• Protecting Remotely Mounted CCTV from Lightning
• Causes and Cures of Passive Intermodulation
• About Copper Ground Rods
• Radio Tower Corrosion Protection
• Joining dissimilar metals and noble metal table
• Placement of GPS and protecting antenna from lightning surges
• About Halo Grounds
• Grounding Rooftop Antenna Installations
• Tower Down Conductors
• Ufer and Tower Grounding

comm-omni@comm-omni.com

Return to Comm-Omni Home Page

Index

To speak to one of our consultants, please call us at 1-800-543-8790