TE -XLHP

XTE/XLHP SERIES
XTE/(x)XLHP/(zz)
X = VOLTAGE CODE
ZZ = OPTIONS

The XTE/XLHP Series is a modular parallel suppressor designed for service entrance or downstream panelboard applications. The XTE/XLHP is a multi-stage suppression circuit consisting of field proven, fast acting 40mm MOVs. A triple redundant surge suppression path is provided for each mode (L-N or L-L, L-G, N-G) guaranteeing continuous service. Each surge suppression module is individually fused and utilizes APT’s Patent Pending TranSafe ™ circuitry with thermal cutout to ensure safe operation during severe over-voltages and high fault current conditions.

The suppression elements are encapsulated in UL Listed and Patented Ceramgard ® providing another level of safety. A filter network is added to provide wave shape smoothing and a high level of EMI/RFI noise attenuation. On-line diagnostics continuously monitor the unit status and feature redundant LEDs to signal a reduction in surge capacity or loss of a suppression circuit. An audible alarm with test and silence features is included in the standard diagnostic package. All APT products are designed and tested in accordance with the recommendations and procedures of ANSI/IEEE C62.41 and C62.45. The XTE/ XLHP is UL 1449 Second Edition Listed, and qualified for service entrance applications under Section 37.3 for their most severe, 25kA, fault current test.

Design Features

	Individually Fused Suppression Modules
	Thermal Cutout
	Redundant Suppression Modules Per Phase (3 per phase)
	Copper Bus Bar Connection (1/4" Bus Bar)
	Solid State Bi-directional
	Redundant Operational Indicators (LED) to indicate loss of protection or curcuit fully operational
	High Energy Parallel Design for Category C3 applications for external mounting nnext to panelboards, switchgear or motor control centers
	Front Panel Alarm with Test/Silence Switch
	AC Tracking Filter with EMI/RFI filtering up to -50dB from 100kHz to 100MHz

Quality

	Five Year Warranty: includes unlimited module replacement
	Burn-in Tested Prior to Shipment
	Short Circuit Withstand Tested to 100KAIC

Performance Features

	Surge Capacity L-N N-G 240kA/phase 240k 160k 360kA/phase 360k 240k 480kA/phase 480k 320k
	UL 1449 Second Edition Listed, 1283 recognized and CUL
	200KAIC Rated Fusing
	Less than 1/2 Nanosecond Response Time
	5000 Category C3 Impulses with <10% Drift

Environmental Features

	Relative Humidity Range: 0 - 95% non-condensing
	Operating Frequency: 47 - 63 Hz
	Operating Temperature: -40^oC to +65^oC
	External Mount NEMA 1 Standard (Other NEMA enclosures are available)
	Standard Size: 21"x17"x4.5" (LxWxD)
	Weight: 35 Lbs.

Model	Service Voltage	L-N	L-G	N-G	L-L	MCOV
XTE/1XLHP	120/240V Split Phase	330	330	330	700	150
XTE/2XLHP	120/208V 3-Phase, Wye	330	330	330	700	150
XTE/3XLHP	120/240V 3-Phase hi-leg Delta	330/ 700	330/ 700	330	700/ 1200	150/ 275
XTE/4XLHP	277/480 3-Phase WYE	700	600	600	1200	320
XTE/5XLHP	480V 3-Phase De;ta		1500		1500	575
XTE/51XLHP	480V 3-Phase corner grnd Delta		1500		1500	575
XTE/6XLHP	240V 3-Phase Delta		700		700	275
XTE/61XLHP	240V 3-Phase Corner grnd Delta		700		700	275
XTE/7XLHP	220/380V 3-Phase Wye	700	600	600	1200	320
XTE/8XLHP	347/600V 3-phase Wye	1000	1000	900	1800	420
XTE/9XLHP	600V 3-Phase Delta		1500		1800	750
XTE/91LXHP	600V 3-Phase corner grnd Delta		1500		1800	750

*Notes: "L-G voltage shown for /G option only. XTE/9.91 not available with /CL Option /G option not available on XTE/5.51, 6/61, 9.91 (3 wire DELTA).

Ordering information for Optional Features should be appended to the model number and seperated by a slash(/). Example: XTE/2XLHP/CL/DS/G

/CX Module Option increases the surge current capacity from 240kA/phase to 360kA/phase.

/CL Module Option increases the surge current capacity from 240kA/phase to 480kA/phase.

/DS Integral Disconnect Switch when a spare 3 pole breaker is not available for connecting the suppressor, order with an internal disconnect.

[Increases size to 24"x24"x7 (LxWxD)] Other disconnect options available.

/DC The Dry Contacts monitor each phase providing a summary alarm. The contacts are terminated in a DB-9 connector.

/RM Remote Monitor with indicator lights and audible alarm is available for use with the Dry Contact Option.

/SC Surge Counter option monitors the occurrence of transients entering the facility through thesuppressor and is supplied with a lithium battery to provide power to the counter in the event of a power failure.

/2S Dual LCD Surge Counters (Separate counter for L-N and L-G modes).

/G Adds L-G mode of protection in WYE configurations.