EDCO Telecom/Datacom Surge Protection Products

 

CX Series



Description

The CX Series Surge Suppressor is a single Coax Line Protector implementing three stage hybrid technology. This Protector addresses over voltage transients with gas tubes and silicon avalanche devices. In addition, sneak and fault currents are mitigated with new solid state resettable fuses - PTC's.

The CX Series is designed specifically for CCTV. DATA and AUDIO applications, offering two connector types BNC & F.

Features & Benefits
bulletSneak Fault Current Protection    
bullet Low Insertion Loss                    
bulletShielded Case

SPECIFICATIONS

Peak Surge Current (8x20us)
Technology
Attenuation
Response Time
Connectors
Protection
Shield to ground
Clamp Voltage
Impedance
Temperature
Dimensions
Humidity
UL Listed
5kA
Hybrid, Solid State
 0.1db @ 10Mhz
 <1 nanosecond
BNC, F
Line-to-ground
(isolated shield models)
Selectable (see ordering)
50 or 75 Ohms
-400C to +850C
(LxWXH) 4.5" x 1.5" x 1.25"
0-95% non-condensing
UL 497


ORDERING INFORMATION

Voltage

F or BNC
Connectors

X or Y
50 or 75 
Ohm

(S)tandard or (I)solated 
Shield from Ground

CX

XX

(X)XX

X

X


Voltages - 06, 12, 15, 18, *75, *90

Use CX-06-BNCY For Std. CCTV Applications

*These models are NOT UL listed.

CATV-145A



Description

The CATV-145A application is specifically designed for lightning protection on Coax Cable TV Systems. The protector is easily installed with standard type F coax connectors. A ground wire must be attached to the unit. The CATV-145A offers low loss even at frequencies approaching 500 MHz. This is important for error-free data communication applications.

Features & Benefits

bulletAutomatic Recovery
bulletLow Insertion Loss
bulletEasily Installed
bulletShielded Case

SPECIFICATIONS

Attenuation                                              0.1db @ 500Mhz
Response Time                                          100ns @ 10kv/us
Spark-over Voltage                                    750 volts @ 10kv/us typ
Surge Handling (1 time)                               5 kA (8x20us)
Connector                                                 Type F
Dimensions                                          
     4.5" x 1.5" x I .25"
Weight                                            4 oz.
Matching                                                  2 75 Ohms



comm-omni@comm-omni.com

  Return to Comm-Omni Home Page

Index

To speak to one of our consultants, please call us at 1-800-543-8790