Telecom/Datacom

DRS Series - Din Rail Low Voltage Surge Protectors


The DRS Series is a din rail mountable single pair surge suppression module implementing three stage hybrid technology. This module addresses over voltage transients with gas tubes and silicon avalanche components. In addition, sneak currents are mitigated with resettable fuses (PTC's). The PTC's increase resistance several orders of magnitude when overcurrents exceed safe levels. A normal state resumes when overcurrents are removed. The ability self-restore in this manner significantly increases suppressor performance and survivability.

The DRS Series mounts onto a standard 35mm industrial din rail. There are two "Field Side" and two "Electronics Side" screw terminals. Two electrically tied ground terminals are provided for grounding the DRS Series unit to Building Approved Ground.

FEATURES

bulletLow voltage data surge protection
bulletThree-stage hybrid protection
bulletSneak/Fault current protection with resettable fuses - PTC's
bulletConvenient numbered Tabs
bulletLow profile packaging
bulletUL-497B Listed
bulletEasy Installation
bulletFits standard 35mm Din Rail
bulletFast response Time


SPECIFICATIONS

(overall) Maximum Let-Thru Voltage (10x1000µs (Occurrences)): >100
Peak Current (8 x 20µs Waveform): 10kA
Maximum Continue Current (ma): 150 
Nominal Series Resistance: 5 Ohms
Part No. Max Peak
Signal Voltage		 Nominal
Breakdown
Voltage		 Max Let-Thru
Voltage 10x700µs
@400Amps		 Typ Cap
(pf)
DRS-008 6 8 15 1500
DRS-015 12 15 20 1500
DRS-232 15 22 30 1500
DRS-030 24 30 35 1500
DRS-036 30 36 45 1500
DRS-043 35 43 55 1500
DRS-050 43 50 72 800
DRS-060 52 60 80 800
**DRS-130RMS 170 200 350 1000

**For this model only Surge Current: >10, Peak Current: 8kA, Max Continuous Current: N/A; Series Resistance: None.      WARNING: For Discrete Signal Use Only. Do NOT use DRS-130RMS on 120VAC poewr lines. This unit is a Non-Hybrid, MOV design, reated above 5A operational current and can withstand greater than 8 occurrences of a 10kA 8x20µs waveform and greater than 1000 occurrences of a 200A 10x1000µs waveform.



5 Blank numbering tabs and 2 Ground tabs are provided with each DRS. Pre-Numbered Tabs available upon request for a nominal charge.

comm-omni@comm-omni.com

If you have reached this page through a browser and do not have the "Comm-Omni Navigation Bar" at the top, please follow this link.

Return to Comm-Omni Home Page

Index

To speak to one of our consultants, please call us at 1-800-543-8790