PolyPhaser dc Blocked
IS-NEMP SERIES
NUCLEAR EMP COAXIAL SURGE PROTECTOR
APPLICATION:
Military, government (FEMA and NCA), protection of emergency radio communications equipment.
| Weatherize using WK-1
| Employs UL497B listed gas tube
| Patented technology
| Ultra-fast response
| Low throughput energy
| High surge current handling
| Aluminum enclosure
| 18-8 stainless steel hardware
| Bulkhead mountable up to ]/4" thick panels (flange mount adapter)
| N silver shell and gold center pin
| Highest pulse attenuation (30.1 4dB for IS-NEMP-CO) of all models tested by NCS (TIB 85-10 document)
| Mounts outside screen room penetration panel or equipment housing for best skin effect and pulse attenuation
| EMI/RFI weather washer for low impedance no drip penetration
| | | | | | | | | | | | |
Mil Specs: Many - call with requirements
SPECIFICATIONS:
Surge: 50kA IEC 1000-4-5 8/20µs waveform 500 joules
Turn-on: 330Vdc ±20%
Turn-on Time: 1.5ns for 2kV/ns
VSWR: (see plots below)
-CO: 1.5 to 2MHz is 1.2 to 1 & 2 to 400MHz is 1.1 to1
-Cl: 50 to 6OMHz is 1.2to 1 & 60 to 700MHz is 1.1 to 1
-C2: l25 to 1000MHz is 1.1 to 1
Insertion Loss: </= 0.1 dB over frequency range
Temperature: -45oC to +85oC Storage/Operating +50oC
Vibration: 1G up to 100Hz
ORDER INFORMATION: N CONNECTORS (Female)
IS-NEMP-CO Throughput Energy 1.10mJ typical
Frequency Range: 1.5MHz to 400MHz
Max. Power: HF 500W, VHF 200W, UHF 100W
IS-NEMP-C1 Throughput Energy: 313µJ typical
Frequency Range: 50MHz to 700MHz
Max. Power: VHF 200W, UHF 100W
IS-NEMP-C2 Throughput Energy: 250mJ typical
Frequency Range: 125MHz to 1000MHz
Max. Power: VHF 200W, UHF (low) 100W
800MHz to 1 GHz 50W
Add suffix: -MA for male antenna port connector
Energy based on 6kv 3kA 8/20µs waveform.
Choose lowest throughput energy for desired frequency.
comm-omni@comm-omni.com
Return to Comm-Omni Home Page
Index
To speak to one of our consultants, please call us
at 1-800-543-8790
|