Polyphaser Grounding Solutions
UNI-KIT SERIES
APPLICATION:
Coaxial shield grounding is required to provide an effective ground path to prevent energy from reaching equipment Integrating copper strop as a conductor provides an improved surface area connection to the cable shield thus reducing inductance
SPECIFICATIONS:
Resistance: 680µ Ohms
Inductance: 0.3µH
Surge Current: 50kA
Total Voltage Drop: 763V (based on 20kA 8/20µ strike
 | UNI-KIT 4 fits 2-1/8" to 4" diameter and elliptical waveguides up to EW2O
| | UNI-KIT 2 fits cables from 1/4" to 2-1/8" diameter and elliptical waveguides up to EW44
| | Lower resistance and inductance than wire pigtails
| | 24" copper tail is weather protected to prevent tower corrosion damage
| | Provides a high current ground path, tested to 50kA
| | Eight models with specially coated ends for no dissimilar metal connections
| | Two NEMA-spaced tail grounding holes provided with stainless (1/4-20x3/4) hardware
| | Quick installation
| | Adjustable strap to cable angle
| | Traditional weatherizing materials included
|
ORDER INFORMATION:
|
Type of metal to be grounded (top clamping end) |
Grounding to (bottom end) |
Diameter |
| UNI-KIT 2CT |
Copper or Brass |
Aluminum, Tin or Galvanized |
1/4" - 2-1/8" |
| UNI-KIT 4CT |
Copper or Brass |
Aluminum, Tin or Galvanized |
2-1/8" - 4" |
| UNI-KIT 2CC |
Copper or Brass |
Copper or Brass |
1/4" - 2-1/8" |
| UNI-KIT 4CC |
Copper or Brass |
Copper or Brass |
2-1/8" - 4" |
| UNI-KIT 2TT*
| Aluminum, Tin or Galvanized |
Aluminum, Tin or Galvanized |
1/4" - 2-1/8" |
| UNI-KIT 4TT
| Aluminum, Tin or Galvanized |
Aluminum, Tin or Galvanized |
2-1/8" - 4" |
| UNI-KIT 2TC*
| Aluminum, Tin or Galvanized |
Copper or Brass |
1/4" - 2-1/8" |
| UNI-KIT 4TC
| Aluminum, Tin or Galvanized |
Copper or Brass |
2-1/8" - 4" |
*Can also be used for grounding a galvanized tower leg.
 comm-omni@comm-omni.com
 Return to Comm-Omni Home Page
Index
If you would like to speak to one of our consultants, please call us at 1-800-543-8790
|