WIRE COPPER ROD TRANSITION CLAMPS AND
WEATHER PROOFING KIT
APPLICATION:
Can be used to bond wire to ground rods, fire risers, etc.
Two adjustable sizes
Cast bronze
18-8 stainless screws
For wire sizes #2 stranded to #10 solid
WEATHER PROOFING KIT
APPLICATION:
Where a weather tight seal is needed with an extreme temperature range and exposed to UV.
Non-conductive
Withstands -65F to +180F without cracking
Paintable latex or solvent based paints
Water impermeable (MIL-S-19653A)
Exceptional UV and salt spray resistance
Non-irritating to skin
Hand applied and self adhering
ORDER INFORMATION:
J-1 -Transition clamp for 1/2" to 1-1/3" diameters J-2 -Transition clamp for 1-1/2" to 2-1/4" diameters WK-1 - Weather proofing kit: 2-1/2" x 6" x 1/8", black (includes 1 roll black electrical tape)