TII 755 Network Interface Device
TII 756 Network Interface Device With Closure
UL Listed
The TII 755 Network Interface Device is designed for mounting within an 800A type station wire box or an electrical outlet box. It contains four terminal points for connecting the incoming station wire, an RJ11 modular plug and jack, and
termination block for the outgoing subscriber station wire. The TII 755 is also available with an 1/2 Ringer. Once the TII 755 is installed, the subscriber has no exposure to the telco wiring.
The TII 756 Network Interface Device is a TII 755 unit
supplied within the TII 160G Utility Service Enclosure for either indoor or outdoor surface mounting. The TII 756 will normally mount adjacent to the station protector. Both the 755 and 756 can be equipped with a 24 inch station wire stub and is available with a 1/2 Ringer.
MODEL |
DESCRIPTION |
TII 755 |
Network Interface Device |
TII 755 2 |
Network Interface Device with stub |
TII 755 01 |
Network Interface Device with 1/2 Ringer Signature |
TII 756 1 |
Network Interface Device in 160G Enclosure |
TII 756 1 01 |
Network Interface Device in TII 160G Enclosure with 1/2 Ringer Signature |
TII 756 3 |
Network Interface Device in TII 160G Enclosure with stub |
TII 756 3 01 |
Network Interface Device in TII 160G Enclosure with stub and 1/2 Ringer |
Dimensions: 755 -2" x 2.88" x 1"
756 - 4.13" x 3.25" x 1.88"
Weight: 755 - 2 oz
756 - 5 oz
Standard Package: 50 pieces
TII 758Z Network Interface Adapter Unit
UL Listed
The TII 758Z Network Interface Adapter is designed to replace the existing cover of a TII 325, TII 326 or TII 321 single pair station protector to add network interface capability. The TII 758Z Network Adapter consists of a rugged plastic housing,
an RJ11 plug and jack with a weather resistant grommet, a customer wiring bridge, a provision for mounting an optional half-ringer termination or MTU circuit, and a hinged top cover with customer wiring instructions. The lockable cover has a Telco override for service entrance
and is available with a hex head or pin-in-head cover screw. The cover assembly attaches to the mounting base with a plastic cover nut. The subscriber is totally isolated from the telco wiring and the station protector and is protected from accidental contact with the customer
bridge terminals.
MODEL
TII 758Z (+)
TII 758ZG (+)
TII 758ZS (+)
TII 758 ZGS (+)
TII 758 91 |
DESCRIPTION
Network Interface Adapter with Pin-In-HeaCover Screw
Network Interface Adapter with Pin-In-Head Cover Screw and Large Grommet
Network Interface Adapter with Hex Head Cover Screw
Network Interface Adapter with Hex Head Cover Screw and Large Grommet
Replacement Kit for Customer Wiring Bridge |
+ Insert 01 for Unit with 112 Ringer or 02 for Unit with MTU
Dimensions: 3.6" x 3.6" x 2.4"
Weight: 8 oz.
Standard Package: 50 pieces
comm-omni@comm-omni.com
Return to Comm-Omni Home Page
Index
To speak to one of our consultants, please call us
at 1-800-543-8790
|