TII 856 HALF RINGER And 831 RADIO FREQUENCY FILTER

The TII 856 Half Ringer is designed to be installed in parallel with the phone line at the customer's premises. The TII 856 Half Ringer provides a minimum impedance of half a normal telephone ringer circuit.
The TII 856V1 is supplied in an epoxy filled shell with 2-six inch leads for mounting in TII's 3200, 759 and 760 Network Interface Devices. This arrangement combines station protection and station electronics in one housing along with network interface for new or existing installations. The TII 85601 is an environmentally sealed pc board with 2-six inch leads for mounting in TII's full line of Network Interface Devices (NIDs).

Dimensions: 1.63" x 0.75" x 0.38"
Weight: 856D1 - .2 oz.
             856V1 - .4 oz.
Standard Package: 10 pieces

MODEL          DESCRIPTION

TII 856D1         Half Ringer for TII's full line of NIDs
TII 856V1         Half Ringer for TII 3200, 759 & 760 NIDs

TII 831 RADIO FREQUENCY FILTER

The TII 831 is a two wire broadband low-pass filter designed to be placed in series with the tip and ring conductors. The Filter is designed to eliminate bothersome interference from the AM, FM, CB and TV VHF-LO bands. The circuit has no adjustments and is essentially transparent to the voice band (0-20Hz).

The filter provides a minimum of 50dB attenuation at 540KHz, a minimum of 80dB at 108MHz and a midband attenuation of 100dB typical.

Dimensions: 831D1 - 1.63"x 0.75"x 0.38", 831W1 -2.38" x 2" x 1"
Weight:       831D1- .2oz., 831W1 - 1.1 oz.
Standard Package: 831D1 - 10 pieces, 831W1 - 6 pieces

MODEL              DESCRIPTION
TII 831 D1            Environmentally Sealed P.C. Board for Mounting Inside Standard NID Enclosures (Equipped with Four Spade-Tipped Leads)
TII 831W1          Surface Mount (Adhesive Backed) Modular Jack (Male RJI I In and Female RJ11 JackOut)

comm-omni@comm-omni.com

Return to Comm-Omni Home Page

Index

To speak to one of our consultants, please call us 
at 1-800-543-8790