TII Telephone Universal Network Interface


TII 3200 UNIVERSAL NETWORK INTERFACE
UL-LISTED CSA CERTIFIED

The TIl 3200 Universal Network Interface is molded of the most durable plastic formulated for industrial use. This material is weather resistant, discoloration resistant and crack resistant even under very severe conditions.

Furnished complete with outer and inner hinged doors, this totally modular unit is also supplied with two adjustable and two fixed card slots for station electronics, customer RJ11 jack, customer wiring bridge, padlock loop with telco override and space to expand to two pair. Expansion parts easily snap into place requiring little field time to upgrade and are common to the TII 759 and 760 Retrofit NIDs. In addition, all hardware is corrosion resistant.

TII's 3200 Universal Network Interface is Underwriters Laboratory listed with virtually all existing protectors. Of course it may also be ordered with TII's superior protector modules.

The telco override feature of this product allows Telco personnel to gain access to the protector and electronics when -maintenance is required and can be done with the standard terminal wrench. A Pin-In-Head security screw is also available for situations or areas that require tighter security.

The hinged doors of the TII 3200 are side opening to give clear access to the roomy interior of the unit. Also, being hinged, there no danger of dirt or contamination from covers that have been dropped on the ground and replaced without cleaning.

ORDERING INFORMATION: Example: 3203H 05 0 1 Housing with interface for one line with ground stud with one TII 355L protector module and one TII 856 Half Ringer

3200XX

HOUSING

3201
Housing with interface for
one line (w/o ground stud)

3202
Housing with interface for
two lines (w/o grounds stud)

3203
Housing with Interface for
one line (with ground stud)

3204
Housing with interface for
two lines (with ground stud)

Note: When 3201 or 3202 is ordered w/355,356 and/or 126 modules installed, use a 322 or B1 adapter




SECURITY
SC
REW
H
= Hex Head
P = Pin-In-Head

xx


STATION
PROTECTION
00
None
01 1 TII 356L
02  2 TII 356L
03  1 TII 356 Ml
04  2 TII 356M1
05  1 TII 355L
06  2 TI 355L
07  1 TI 355M
08  2 TII 355M
For Use in 3201
and 3202 Only
15  1 TII 126M w/Bi
16  2 TII 126M w/Bi
17  1 TII 126Lw/B1
18  2 TII I26Lw/B1
Mounting Adapter Only
50 1 TII 322
51  1 TII B1

x

RESERVED

0

xxxx


ELECTRONICS
Any combination of 4 boards - 2 small and 2 Large
0000 NONE

Small Boards
1 TII 856 Half-Ringer Simulator
2 TII 807 MTU

Large Boards
3 TII 817AN1
4 TII 821V3 Selective Ringing Module

REPLACEMENT/EXPANSION PARTS
91 One Line Plug & Jack Replacement Upgrade Kit
92 One Line Customer Bridge Assembly
93 One Line Jack Assembly
94 One Set of 2 Card Guides with Mounting Screws and Washers

 
Dimensions: 6.7" x 6.7" x 2.7"
Weight: 13 oz. - 1 Pair 15oz.-2Pair
Standard Package: 20 pieces

comm-omni@comm-omni.com

Return to Comm-Omni Home Page

Index

To speak to one of our consultants, please call us 
at 1-800-543-8790